Fax: 250-494-9610 info@mysticprecision.com
Low Budget Rifle Stock Build by bobfortiers of CGN

Low Budget Rifle Stock Build by bobfortiers of CGN

This is a photo essay of a stock build for a Savage Axis using commonly available materials and tools.  Now Bob is pretty darn good at wood working as it shows in his skill in the build BUT none of this is beyond many shooters/hobbyist.    Some great tips and pics.    Enjoy… Orig post on CGN I wanted a dedicated gun to shoot at targets, either from a bench at 100m or shooting long range in F-class type of shooting. I did not have a lot of budget for this project, so I decided to build from a Savage Axis gun. I found one used in 223 for 300$. Being a stockmaker it was a no-brainer to me that I wanted a new stock for it, because Axis stocks are a bit on the soft side. Also, I wanted to see if the Axis action could be used for a built. I think that there will be more and more of those around, so we might as well play with them a bit. Since the Axis trigger guard is made of plastic and integral to the stock, I made my own using aluminium from the home center and a jig in plywood. The recoil lug is in the stock on a Savage Axis, I checked and it is easily removed. More on that later. The stock was made of russian birch plywood, laminated with exterior glue. I did not want a dedicated bench stock, with flat foreend to ride on bags. I enjoy shooting prone with a bipod, and I wanted a do-it-all kinda stock. I started with a wide...
My New Sightron SIII by Barry Luscombe

My New Sightron SIII by Barry Luscombe

The journey began several years ago in my quest for long range hunting accuracy. Taking my old Winchester Model 70 in 300 win mag after the factory barrel just wouldn’t cut it any more and deciding on a new barrel. I’ve no idea how many rounds went down that pipe but it was many. The first barrel on it was a Bevon King SS match heavy contour with a 1-9 twist for the Sierra 240gr. Matchking and off I went to try my hand at 1000 yard shooting. Lesson 1 was the Bushnell Banner 3 to 9 and standard 2 piece base set up wasn’t going to get me there. Over the winter I got a one piece base and cut a piece off a .020” feeler gauge and Devconed it into place. Then for a whopping 60 bucks I bought a Futong Tactical scope at the Prince George Gun Show. Very good looking scope. 2nd shot it turned into a kaleidoscope, hilarious. Sent it back to the dealer in Vancouver and within a week another was in the mail box. This one made it to about 5 shots then did the same thing. Actually the scope was worth the money cause to this day my Grandsons still have a ball with it. Then came the Wotac out of Oklahoma from Wonders Optics. Also a tactical job. Love the hash mark retical and the windage and elevation adjustments were dead on and repeatable. Unfortunatly the optics were only a tad better than had they been made by Mattel. Out shooting one day and at 600yds I couldn’t make out...