by admin | Oct 16, 2015 | F Class, Gallery, Rifle, Tech
I am thrilled to have received my new Pierce Custom Titanium Rem SA type receiver. This will go into my new FTR rifle for the 2015 Season. As pictured – Long Tenon, Fluted Bolt, Timney Calvin Elite – Action is in the White. I swapped out for a Jewell BR in the final set up. Very impressed with the machining and tolerances of these Actions. I have seen them in action and they work very well. Can’t wait to get my rifle finished in the coming months. Weight of my receiver without base or lug as pictured… 23.5 ozs Pierce alloy base is about 1 oz Rear Square Tang. With this feature, you do not need to use a recoil lug in smaller chamberings. I added a precision ground oversized lug as I will be putting alot of rds through this receiver of heavy recoiling 308… Scalloped bottom reduces weight some more and adds more bearing surface in bedding. Notice that notch in the front of the receiver. I swap barrels alot and this allows me to us a lug with a pin. Ensures the lug is properly indexed in my bedding … sure saves a huge headache and I don’t need to pin the receiver. Not a fan of taking any metal out of receiver in a way that can weaken it. And there is never a risk of a pin breaking off inside the receiver… that’s a headache you just don’t need. Fluted Bolt Body, Tactical Bolt knob, Cone Breech Beautiful machining and chambering by Terry at Black Art Rifle Company. Min spec chamber and will...
by admin | Feb 12, 2012 | Gallery, Rifle, Tech
This is a photo essay of a stock build for a Savage Axis using commonly available materials and tools. Now Bob is pretty darn good at wood working as it shows in his skill in the build BUT none of this is beyond many shooters/hobbyist. Some great tips and pics. Enjoy… Orig post on CGN I wanted a dedicated gun to shoot at targets, either from a bench at 100m or shooting long range in F-class type of shooting. I did not have a lot of budget for this project, so I decided to build from a Savage Axis gun. I found one used in 223 for 300$. Being a stockmaker it was a no-brainer to me that I wanted a new stock for it, because Axis stocks are a bit on the soft side. Also, I wanted to see if the Axis action could be used for a built. I think that there will be more and more of those around, so we might as well play with them a bit. Since the Axis trigger guard is made of plastic and integral to the stock, I made my own using aluminium from the home center and a jig in plywood. The recoil lug is in the stock on a Savage Axis, I checked and it is easily removed. More on that later. The stock was made of russian birch plywood, laminated with exterior glue. I did not want a dedicated bench stock, with flat foreend to ride on bags. I enjoy shooting prone with a bipod, and I wanted a do-it-all kinda stock. I started with a wide...
by admin | Nov 14, 2011 | Gallery, Rifle, Tech
Here is a copy of the CGN post by Parabellum on how to fit the Norinco M305 to the new Promag Precision stock. The info and pics are complements of Parabellum and used here with his permission. Thanks for the info and I am sure it will help many fit their Norinco M1A’s to this wonderful stock. LINK to the orig CGN post The Promag Unit Now secure the stock in a vise or similar. Be careful to not scratch it Protect the surrounding area with tape. Measure from the front of the action opening back 6 1/4″. You will be filing 1 1/2″ forward of this mark. Also, measure down about 3/16″ from the top of the stock and mark. Some rifles may need less The tools that will be needed to do the modifications include 2 different files, razor blade and 180 and 320 sand paper Then start filing making a bevel towards the “inside” of the stock Lastly, some pictures with a level to show the angle because it is hard to see in the pictures. Enjoy. Some additional spots that needed fitting Fitting the trigger pads is next but there are no pics of this step. The fitting is done when the trigger guard will close using firm pressure on both the action and the trigger group. The tighter this fit is, the better. You may find that additional material will need to be removed in the inletting if the action is not sitting flat with the stock Slowly file material in the stock until the action fits level and flush. Go slow and...
by admin | Mar 24, 2011 | Rifle, Tech
Great info on the Stevens 200 by 303British.com Thanks Steve The Stevens 200 by Savage Arms What About These Stevens Rifles? Stevens 200 Aftermarket...
by admin | Feb 1, 2011 | F Class, Gallery, Load Tuning, Rifle, Tech
Oct 16, 2009 This is a very common question I get asked. The short answer is VERY WELL and it really depends on the quality of barrel used and the precision of the chamber cut. I just received a new Shilen SS Select match barrel prethreaded and chambered for the Savage action in 260AI. I put this into an older Savage action that used to be my 7RM LR hunting rig. Into my BR style thumbhole stock and off to the range. Below is a picture of the test groups I shot today with new, almost fireformed Win brass, Lapua 139gr Scenars, H4831SC, CCI BR2 primers. Conditions were near ideal with next to no wind, overcast, cool but damp (just rained). [almost fireformed brass – this brass was formed using a light charge of pistol powder and cornmeal and has the shoulder about 90% formed (still rounded shoulder). The first smokeless load performs the final forming and gives the case a nice sharp shoulder] After the first 6 shots to try and sight in the rifle, I found that the scope ring shims (Burris Sig Zee rings) were way off and I was shooting way too high. I forgot my extra shims so had to make do. Was able to get the POI on the target but still over 1ft high at 100yds. All testing was done at 100yds because I couldn’t keep on target at 200yds – POI way too high. A couple more shots and I was near the target and had run out of sighting in ammo so I had to use my first test load....
